CHARACTERISTICS OF ROOM THERMOSTAT TELECONTROL T10D / T10D-GSM:
ROOM THERMOSTAT
- LCD display showing room temperature
- Heating on/off switch.
- Room temperature setting control and display.
- Maintains temperature protection against freezing.
- Options to select the heating regime, cooling regime and the regime to control the floor heating system (with the optional floor sensor).
OPERATION BY PHONE OR MOBILE PHONE
- Voice communication in Croatian or English language.
- Heating on/off switching.
- Room temperature measurement.
- Room temperature setting.
- Measurement of external temperature (with the optional external temperature sensor).
- Ability to change user parameters.
OTHER CHARACTERISTICS
- Uses an analog telephone line or ISDN line with analogue output.
- Light indicator of output status.
- Changeable user code.
- No interference with normal operation of other devices connected to the same phone line (telefax, modem, alarm…)
CHARACTERISTIC OF ROOM THERMOSTAT TELECONTROL T10DP / T10DP-GSM:
- In addition to the characteristics of the T10D -/GSM thermostat, the room thermostats Telecontrol T10DP and T10DP-GSM also have the following:
- 7-day programmable thermostat.
- Second channel (allowing only on/off switching).
CHARACTERISTICS OF ROOM THERMOSTAT ST-TD:
– ON/OFF electronical weekly programmable room thermostat
(heating or cooling), works on 2*AA (1.5V) batteries.
– Connection to pump, boiler, spring motor actuator or two-point motor actuator.
– The regulating temperature range is between 5°C and 40°C, 3 operating modes (comfort, energy saving or frost protection/off).
– Can be set in holiday mode from 1 hour up to 99 days.
– The display shows the measured temperature, the active mode and if the relay is activated.
– Contact 5(1)A @ 250V AC.
– Option of operating according to outdoor temperature sensor.
– Option of remote control by a GSM device (additional equipment).
(heating or cooling), works on 2*AA (1.5V) batteries.
– Connection to pump, boiler, spring motor actuator or two-point motor actuator.
– The regulating temperature range is between 5°C and 40°C, 3 operating modes (comfort, energy saving or frost protection/off).
– Can be set in holiday mode from 1 hour up to 99 days.
– The display shows the measured temperature, the active mode and if the relay is activated.
– Contact 5(1)A @ 250V AC.
– Option of operating according to outdoor temperature sensor.
– Option of remote control by a GSM device (additional equipment).
CHARACTERISTICS OF ROOM THERMOSTAT ST-TB:
– Wireless ON/OFF electronical weekly programmable room
thermostat (heating or cooling); works on 2*AA (1.5V) batteries.
– Delivered are room thermostat and receiver TWR911, operating with230V AC.
– Connection to pump, boiler, spring motor actuator or two-point motor actuator.
– The regulating temperature range is between 5°C and 35°C; 3 operating modes (comfort, energy saving or frost protection/off).
– Can be set holiday mode from 1 hour up to 99 days.
– The display shows the measured temperature, the active mode and if the relay is activated.
– Contact 6(1)A @ 250V AC.
– Option of operating according to outdoor temperature sensor.
– Option of remote control by a GSM device (additional equipment).
thermostat (heating or cooling); works on 2*AA (1.5V) batteries.
– Delivered are room thermostat and receiver TWR911, operating with230V AC.
– Connection to pump, boiler, spring motor actuator or two-point motor actuator.
– The regulating temperature range is between 5°C and 35°C; 3 operating modes (comfort, energy saving or frost protection/off).
– Can be set holiday mode from 1 hour up to 99 days.
– The display shows the measured temperature, the active mode and if the relay is activated.
– Contact 6(1)A @ 250V AC.
– Option of operating according to outdoor temperature sensor.
– Option of remote control by a GSM device (additional equipment).
CHARACTERISTICS OF ROOM THERMOSTAT ST-A:
– ON/OFF electromechanical room thermostat
– Connection to pump, boiler, spring motor actuator or two-point
motor actuator
– Switch for temperature regulation: 8°C-30°C.
– Contact 5(2.5)A @ 250V AC
– Connection to pump, boiler, spring motor actuator or two-point
motor actuator
– Switch for temperature regulation: 8°C-30°C.
– Contact 5(2.5)A @ 250V AC